Water Contamination in Oil & Fuel – Removal Guide | KLEENOIL
Water is one of the most damaging contaminants in hydraulic oil, lubricating oil and stored diesel. It can enter unnoticed, damage equipment and increase maintenance costs. Understanding where it comes from—and removing as much free water as possible before fine filtration—can make recovery considerably more economical.
1. Where does the water come from?
Hydraulic and lubricating oils
- Condensation: warm reservoirs cool, allowing moisture in the air to condense.
- Breathers and seals: humid air, rain, pressure washing or damaged seals can admit water.
- Cooler leaks: a failed oil/water heat exchanger can introduce substantial water.
- Handling and storage: open drums, poor tank covers and contaminated deliveries.
Diesel and stored fuels
- Condensation and humid air entering storage tanks.
- Rainwater through vents, inspection hatches, filler caps or poorly sealed fittings.
- Water carried in with fuel deliveries or transferred from contaminated containers.
- Water accumulating at low points when tanks are not regularly inspected or drained.
2. What damage does water cause?
In hydraulic and lubricating oils
Water can weaken the lubricating film and encourage corrosion, cavitation-related damage, additive degradation, oxidation, sludge and filter plugging. Bearings, pumps, valves and precision components may suffer accelerated wear. Not all contaminated oil looks milky: even apparently clear oil can contain dissolved water.
In diesel fuel
Water in tanks can promote microbial contamination at the fuel-water interface, corrosion, sludge and blocked filters. Free water reaching fuel equipment can contribute to injector and fuel-system problems. Diesel should be assessed for condition and suitability before reuse; removing water alone cannot reverse badly degraded fuel.
3. Free, emulsified and dissolved water
Free water separates out and often collects at the bottom of a tank. Emulsified water is dispersed as fine droplets and may cause a cloudy or milky appearance. Dissolved water is held within the fluid and may not be visible. Different water forms may require different methods of removal. No single filtration method is suitable for every fluid and every contamination condition.
4. How KLEENOIL cellulose depth filtration works
KLEENOIL's cellulose depth cartridge combines fine particulate filtration and moisture absorption in a compact, straightforward replaceable element for suitable oil applications. Oil flows through a deep structure of cellulose fibres rather than relying only on a thin surface filter. Contaminants are captured within the media, while the cellulose takes up water and swells as its water loading increases.
As saturation increases, the remaining void space and flow capacity can reduce. A heavily water-loaded cartridge can deform or collapse, which is why cartridge condition and operating pressure must be monitored and the element changed when required. The illustration below explains the progressive loading mechanism.

What makes the KLEENOIL approach valuable: where the fluid and water condition are suitable, a single cellulose depth cartridge can tackle both fine particles and moisture, without requiring a separate fine-particle filtration stage. Other water-removal technologies do exist—including coalescers, separators, vacuum dehydration and specialist absorbent media—so the best method depends on the application.
5. Practical tips: reduce water before using cartridges
- Identify and stop water ingress first. Check seals, tank covers, coolers, breathers, storage arrangements and recent deliveries.
- Allow free water to settle where practical. If the tank and fluid permit, let separated water collect at the low point.
- Drain or separate bulk free water before fine filtration. Use appropriate safe tank drains or separation equipment, avoiding unnecessary removal of usable oil or fuel. This can significantly reduce cellulose cartridge consumption.
- Position suction and return hoses correctly. Avoid stirring bottom sludge or free-water layers unnecessarily, keep suitable separation between hose ends, and avoid aeration and foaming.
- Work steadily at the specified equipment flow rate. Do not force excessive flow through water-loaded cartridges. Monitor operating conditions and change cartridges as required.
- Assess contamination early. Especially wet fluids can consume many cartridges; ask KLEENOIL to estimate likely costs before committing to a long cleanse.
- Use laboratory analysis. Compare before-and-after moisture and cleanliness results and assess the wider oil chemistry or fuel condition before returning the fluid to critical service.
Why excessive water matters to cleaning costs
Additional cartridges have a cost and each used cartridge may retain approximately one litre of fluid. Very wet oil can require numerous changes, so removing bulk free water first can save consumables and reduce fluid losses. KLEENOIL will always aim to assess whether a proposed cleanse is financially worthwhile compared with replacement before starting.
6. Should you clean the fluid or replace it?
It depends on fluid value, contamination, cartridge demand, available downtime and laboratory results. Cellulose filtration cannot restore depleted additives, reverse oxidation or guarantee that all contaminated oil or fuel is reusable. KLEENOIL can advise on the most practical approach before starting.
Explore hire and workshop cleaning prices, mobile oil filtration equipment, permanent bypass units, laboratory analysis and our diesel fuel cleaning guide.
Speak to the KLEENOIL office on 01977 682810 or email sales@kleenoil.co.uk.