Oil Analysis Results Interpreter | ISO 4406, Water & Wear | KLEENOIL

KLEENOIL TECHNICAL TOOLS

Oil Analysis Results Interpreter

Turn laboratory readings into clear explanations and practical next steps.

01 · ISO 4406
Particle cleanliness
02 · Water ppm
Moisture assessment
03 · Wear
Condition warnings
04 · Next steps
Technical guidance

Enter the readings from your laboratory report. KLEENOIL will explain what the results indicate, where filtration may help and when further investigation is needed. This is a screening guide, not a laboratory diagnosis or a declaration that oil is fit for use.

2. ISO 4406 particle cleanliness (if reported)

Enter the three numbers separately, e.g. 22 / 20 / 17. Leave blank if not available.

Your interpretation will appear here.

Important guidance

ISO 4406: Its three codes reflect the number of particles at or above 4, 6 and 14 µm(c) per millilitre. A code difference of one represents approximately a factor of two in particle concentration. Acceptable limits vary by system and component sensitivity.

Water: A ppm result is meaningful only alongside fluid type, temperature, laboratory method and the application's water tolerance. Filtration may assist with water contamination, but free water, severe emulsions or ongoing ingress may require separate treatment.

Fuel: Diesel contamination assessment may require different cleanliness criteria and specific fuel laboratory testing; an ISO 4406 comparison alone is insufficient to judge fuel quality.

Oil condition: Filtration may reduce particles and moisture, but does not restore depleted additives, correct oxidation, or resolve the cause of abnormal machine wear. A laboratory and equipment-specific assessment determines suitability for continued service.

ISO 4406 explanation · Water contamination guide · Find a KLEENOIL filtration system · Permanent bypass filtration