Oil & Fuel Filtration for Industry | Applications | KLEENOIL

Different industries. Different machinery. One shared problem: valuable oil and fuel can become contaminated long before the end of their useful lives.

From recycling shears with enormous hydraulic reservoirs to precision injection moulding, boats, marine engines, turbine lubrication and engineering test rigs, KLEENOIL helps businesses control fine particles and water, recover suitable fluids and document the results.

The KLEENOIL approach

Assess the application, select the right filtration and sampling plan, and verify improvement using independent Finning oil analysis where appropriate. We aim to preserve serviceable fluids, not condemn them unnecessarily.

Explore the applications

LARGE HYDRAULIC RESERVOIRS

Waste recycling: balers, shears and compactors

Balers and shears rely on hard-working hydraulic systems, often with substantial oil volumes. Fine wear debris, dirt and moisture can accumulate during demanding cycles; replacing an entire reservoir can be expensive and disruptive.

Mobile KLEENOIL cleaning units can tackle a contaminated charge, while suitable fixed bypass units and periodic monitoring support cleaner oil in ongoing service. For the largest sumps, the arrangement is sized to the machine and oil volume rather than assuming a single small unit is sufficient.

Example: anonymised recycling site dashboardHydraulic oil for a baler or shear · Illustrative portal layout; not a customer result
ISO 4406
Particle cleanliness trend
Water
Content and trend
Wear metals
Condition indicators
Engineer verdict
Actions and next sample
What matters most: Reservoir cleanliness, water control, wear trends, lower unnecessary disposal and documented maintenance.
Explore MS8 mobile filtration →Cleaning and hire options →

CLOSE TOLERANCES

Plastics & injection moulding: precision depends on clean oil

Injection moulding machines and their hydraulic controls demand consistent performance. Fine particulate contamination can affect servo valves, proportional valves and other precision components long before a reservoir looks visibly dirty.

We favour a correctly specified dedicated bypass filtration unit, combined with quarterly service visits, cartridge changes, independent oil sampling and accessible trend reporting. This allows maintenance teams to spot developing issues rather than relying on calendar-based oil replacement alone.

Example: anonymised injection moulding dashboardDedicated bypass filtration with quarterly sampling · Illustrative portal layout; not a customer result
ISO 4406
Particle cleanliness trend
Water
Content and trend
Wear metals
Condition indicators
Engineer verdict
Actions and next sample
What matters most: Fine-particle control, condition trending, early warning and an auditable service history.
View hydraulic SDU →Factory maintenance programme →

OIL AND FUEL AT THE WATER'S EDGE

Marine, leisure craft & canal boats

Workboats, leisure craft and canal boats may experience long periods of storage, variable operating hours and exposure to moisture. Diesel tank water, fuel contamination and hydraulic system cleanliness can become significant problems, particularly before a vessel returns to service.

Suitable portable fuel cleaning can remove sediment and some water contamination; depth bypass filtration may be appropriate for compatible oil circuits. Marine use calls for careful fuel compatibility, safe connections, suitable electrical protection and the vessel or engine manufacturer's requirements. Worn-out engine oil cannot be made new by filtration.

What matters most: Cleaner stored diesel, water management, reduced filter blocking and appropriately maintained hydraulic circuits.
Explore ELAIS fuel cleaning →Diesel and water guide →

DON'T DISCARD BARELY USED OIL

Machinery builders, commissioning & test facilities

Engineering test rigs, power-transmission systems, gearboxes and hydraulic machinery may be filled for proving, commissioning or short-duration tests, then drained. Oil that has only operated briefly can still contain assembly debris or moisture, but it may have considerable useful life remaining.

Where the fluid identity, segregation, compatibility and analysis support it, KLEENOIL can help clean and dry these charges for controlled reuse. A dedicated mobile rig can make recovery a repeatable internal process instead of a one-off exercise.

What matters most: Recovered test oil, reduced new-oil purchases and documented cleanliness before reuse.
Explore MS2 →When oil can be reused →

KEEP LUBRICANTS DRY

Turbines, gearboxes & power generation

Turbine and gearbox systems can hold expensive oils whose performance is sensitive to water, particles and ageing. Water control is especially important in many turbine applications, while small wear particles can be early indicators of mechanical issues.

Appropriately sized offline filtration, water-removal methods and independent sampling can help protect suitable fluids. Stable emulsions, dissolved water or extensive chemical degradation may require other treatment technologies or oil replacement; the correct solution follows the test evidence and OEM requirements.

What matters most: Dryness and particle cleanliness against the relevant target, wear trending and fewer unnecessary large-volume oil changes.
Discuss a turbine oil cleanse →Water contamination guide →

FROM ONE MACHINE TO WHOLE-SITE CARE

Industrial production, manufacturing & mobile plant

Paper mills, food production, metalworking, factories, crushers, excavators and other industrial plant all present different contamination risks. Some benefit from one-off clean-up, others from a shared mobile filtration rig, and others from a dedicated permanent installation.

KLEENOIL can help select the right arrangement for the fluid, machine, pressure, flow, temperature and operating conditions — then provide the maintenance and oil-analysis support to keep it effective.

What matters most: Contamination control that fits the operating pattern instead of a one-size-fits-all solution.
Choose an MS filtration rig →Permanent bypass filtration →

Five levels of support — choose what fits

1. One-off cleanse

Recover a suitable contaminated fluid charge.

2. Equipment hire

Use a KLEENOIL mobile system when you need it.

3. Own your mobile rig

Implement in-house cleaning across equipment or test batches.

4. Permanent bypass filtration

Maintain oil cleanliness during normal service.

5. Quarterly managed care

Cartridge changes, system checks, Finning sampling and trend reports.

The proof matters

We can provide KLEENOIL's interpretation of independent Finning test results, including particle cleanliness, water and relevant condition indicators. Reports show what has been measured, trends over time and any recommendations. Any cleanliness or dryness statement is made relative to agreed targets and the tests performed — not simply a clear-looking sample.

A dedicated industry library is next

This page is the starting point. Each sector can later have its own dedicated guide with real installations, relevant equipment and appropriately anonymised, customer-approved example reports. For now, choose your industry above or contact our technical team for a practical recommendation.

Tell us what you run — we'll help you protect the fluid

Send us your industry, equipment, fluid type, tank volume and main concern. We can discuss testing, one-off oil cleaning, hire, permanent filtration or a quarterly maintenance plan.

sales@kleenoil.co.uk · 01977 682810

How to save oil and extend oil life →